How to Build a Squirrel House
A squirrel house is a perfect place to raise a family of adorable rodents. These cute little animals live in nests and can provide plenty of nuts and seeds for your pets. You can also build one for your yard for decoration purposes, or as a source of food for your pet. Squirrel houses are similar to bird houses, except they are a lot bigger, with a deeper interior chamber that the squirrel can use for nesting and storage.
You can use scrap lumber or exterior grade plywood for the walls of the squirrel house. You should use smooth boards for the walls. The door should have a diameter of about three inches to keep out predators. You can also include a small hole for the squirrels’ entrance. You can make the door as close as you can to a branch as possible, and you can align the boards with your hands to ensure a perfect fit.
When building the house, you should make sure that it is made of a sturdy board. You should use a 1-inch board for the front, while a larger one for the backboard. The door should be approximately three inches in diameter, and you should place the house at least 20 feet up from the ground. It should also be located on a sturdy tree with at least a 10-inch diameter. Make sure that the hole is in a safe spot and is not too close to the branch or the animal could get out of the house.
Once you have the materials, you need to start constructing the squirrel house. It is best to use a 1-inch lumber for the backboard and two-inch lumber for the front. Then, place the entrance hole in a branch of a tree with a diameter of at least 10 inches. It is best to place the squirrel house close to a branch to keep predators out.
After choosing the right size of the wood, you should measure the dimensions of the sides and the roof of the house. The front and back boards should be about an inch shorter than the backboard. Next, you need to measure the side walls. You should make a divider that fits inside the bottom floor. A three-inch hole in the floor will make the home look neat and attractive. It should be slanted for easy access for the squirrel.
Must Read: How to Get a Squirrel Out Of Your House
The doors of squirrel houses should be designed to be inaccessible for predators. You can build a shelf inside the door to keep predators out. Ensure the door is a small door with a diameter of three inches. You should also build a door for your squirrels. The door should be small enough to block out any potential predators. Once you have the right size, you need to attach the walls in the correct order.
A squirrel house should be constructed of 1 inch-thick wood. It should have an entrance hole that is three inches wide. The base should be made of one-inch-thick wood. Once you have the right size, you should cut the floorboard in the proper dimensions. It should be attached to the trunk of a tree with screws. After the foundation is finished, you can add the floor divider and place it into the top of the squirrel’s home.
For the squirrel house, you need two large nails, a sturdy ladder, and a place to build the door. A good location is a place where the squirrel can easily enter and exit the house. The entrance should be out of reach of predators, so a door should be a barrier. A door should be built on the side of the house for the best accessibility. A side window should be placed on the opposite side of the entrance for better visibility.
To build a squirrel house, you must first gather the necessary tools and prepare the site. The ground should be level and have no sharp objects. Before building, you should have the wood cut according to the measurements. Then, cut the wood boards with the right dimensions. Alternatively, you may use plywood, but it may not withstand the squirrels’ chewing. The bottom of the structure should be as compact as possible.
Jessica Watson is a PHD holder from the University of Washington. She studied behavior and interaction between squirrels and has presented her research in several wildlife conferences including TWS Annual Conference in Winnipeg.