How To Make A Squirrel Guard For Bird Feeder

How to Make a Squirrel Guard For Your Bird Feederhow-to-make-a-squirrel-guard-for-bird-feeder

You’ve probably seen some of the popular bird feeder guards, but how do you make one? Here are some tips:

Distracting squirrels

In order to keep squirrels from stealing birdseed, one way to deter them is to create a different food source for them. Squirrels have a propensity to follow the path of least resistance, so making food available elsewhere in your yard will make them more interested in your feeder. A simple trick is to hang a suet ball or seed ball in a nearby tree branch. If you cannot hang a suet ball, hang acorn or walnut.

Adding a squirrel baffle will prevent the animal from accessing the bird seed. These plastic baffles can be averted cones or even cylindrical shapes. These devices will keep squirrels from climbing on the feeder. If you want to use a curved barrier, choose one that is between 15 and 18 inches wide and attached to the bird feeder. A squirrel baffle can prevent the squirrel from reaching the birdseed because it is a curved barrier that is unattractive to the animal.

Glue traps

If you want to catch the squirrels and keep them away from your bird feeder, you can make a guard using glue traps. However, this method isn’t always effective. Small squirrels can get trapped in glue traps, and you may end up hurting the bird or even the squirrel itself. You also can’t guarantee that squirrels won’t find a way back through the guard and feeder.

Before you try to use glue traps on squirrels, you need to know about the toxicity of glue. It is an inhumane method, as it causes the animals to starve or suffer panic attacks. In addition, it may suffocate if the squirrel gets stuck by its nose, or try to chew off some parts of its body to free itself. It can also lead to a cat’s illness, since the rodents will bring them back into the same place. This is not a good way to protect your birds.

Metal baffles

If you’ve ever tried to attract a squirrel to a bird feeder, you know that they can empty it in minutes! Luckily, there are solutions for this. By making a squirrel guard for your bird feeder, you can keep them out and enjoy watching your beautiful birds. Here’s how to make one:

First, you need a round metal pipe or duct cap. Next, you need clamps. Depending on the size of your pole, you may want to use L-brackets or pop rivets. Once you have those materials, you’re ready to assemble the guard. The baffle should be large enough to cover the area around your bird feeder, but not so large that it will hinder the bird’s view.

To create a squirrel guard for your bird feeder, first measure the height of your bird feeder. For instance, if you’re hanging it from a shepherd’s crook pole, it will need a baffle about four inches high. Then, drill a hole in the center and slide the baffle into the pole. Then, hang the feeder at least seven to eight inches above the ground.

Slinky baffles

If you want to prevent a squirrel from climbing a bird feeder pole, you can install a slinky baffle to deter them. Simply purchase a slinky and attach it to the pole. When a squirrel tries to climb up the pole, the slinky will fall. Another solution is to use a squirrel baffle. A slinky baffle is a tubular object designed to slide over the pole of your bird feeding station. It can be planted at the base of the pole or between the ground and the feeders.

To install a slinky baffle, first measure the diameter of the pole. You should have a pole that is no more than six inches. You should use a straight pole as the slinky baffle cannot slide over a shepherds hook. Once you have measured the diameter of the pole, you can drill pilot holes to install the baffle. You should also have a hole saw or drill bit that is smaller than the diameter of the pole. Once you have the holes drilled, twist the end cap onto the pole.

What materials do you need to make a squirrel guard for a bird feeder?

You will need a piece of wire mesh wire cutters and pliers.

How do you cut the wire mesh to the right size?

Measure the circumference of the bird feeder and cut the wire mesh to that size.

How do you attach the wire mesh to the bird feeder?

Use pliers to twist the wire around the top of the bird feeder.

What will the wire mesh do?

The wire mesh will keep squirrels from being able to climb up the feeder and eat the bird food.

Do you need to do anything to the wire mesh after you attach it?

No the wire mesh is ready to use after it is attached.

How long will the wire mesh last?

The wire mesh will last as long as the bird feeder does.

What happens if the wire mesh gets damaged?

If the wire mesh gets damaged it will need to be replaced.

Can the wire mesh be reused?

No the wire mesh cannot be reused.

What are the benefits of using a wire mesh to protect the bird feeder?

The wire mesh is a physical barrier that will keep squirrels from being able to access the bird food.

Are there any other benefits to using a wire mesh to protect the bird feeder?

The wire mesh will also keep other animals from being able to climb the feeder such as raccoons.

Are there any drawbacks to using a wire mesh to protect the bird feeder?

One potential drawback is that the wire mesh can rust over time.

What can you do to prevent the wire mesh from rusting?

Apply a coat of clear sealant to the wire mesh to prevent rusting.

How often do you need to apply the clear sealant?

The clear sealant will need to be applied every few months.

What happens if you don’t apply the clear sealant?

If the clear sealant is not applied the wire mesh will eventually rust.

Is there anything else you need to do to maintain the wire mesh?

No the wire mesh does not require any other maintenance.

Leave a Comment