How To Remove Furnace Fan From Squirrel Cage

How to Remove a Furnace Fan From a Squirrel CageHow To Remove Furnace Fan From Squirrel Cage

The blower motor of your furnace is probably located behind the control board. Sometimes it is referred to as a squirrel cage because it looks like a cage on wheels a squirrel would run on. In this article, you’ll learn how to remove this component of your furnace. This unit may be clogged, overheated, or simply malfunction. If you’d like to clean it, follow these tips.

Blower motor is responsible for directing warm air from furnace to home

When the thermostat on your home’s furnace reaches a certain temperature, the blower motor in your furnace automatically slows down to provide the same amount of heat as the thermostat set for that specific temperature. If you hear a humming or buzzing noise when using the furnace, this could be a sign of a malfunctioning blower motor. A qualified HVAC technician can help you determine if your furnace needs to be serviced or repaired.

If you have recently installed a new furnace or are experiencing cold air from your furnace, you should check the blower motor. The blower motor is a key piece of equipment in your home’s HVAC system. Without it, your furnace cannot effectively distribute the heated air throughout your home. Consequently, if your blower is not working properly, your furnace may not reach the desired temperature in your home.

It can overheat

Before you can replace the furnace fan in your squirrel cage, you must shut off the power and unbolt the metal frame rails. Then, locate the blower unit. It may be a single unit or separate blowers. You can also locate a motor bolted to the end of the blower assembly. Once you’ve located the motor, you can unscrew it from the metal frame rails.

You may need to clean the blower and the motor in the furnace fan, which are prone to getting clogged with dirt. To clean the blower, remove the furnace fan from the squirrel cage and vacuum the wheel and the space between the blades. If the fan is noisy, clean the drive belt and the motor housing, which are often rusted. Clean the motor housing to prevent a thermal overload.

It can get clogged

Cleaning the blower fan inside a squirrel cage can be a tricky process. Typically, you have to physically remove the fan assembly from the furnace frame to access the fan’s motor and wheel. Although you can try to vacuum them, this isn’t always an option. If you have a squirrel cage that isn’t vented to the outside, cleaning the fan will help keep the unit running more efficiently.

Next, you need to identify the part that has become clogged. If the blower is located at the front, you may have to unscrew the access panel to access the fan. Then, locate the motor, which may be a separate unit or a single blower. Some motors are anchored to the side of the furnace, while others are attached to the motor with a drive belt. A worn drive belt can make the fan squeak and stop working altogether.

It can malfunction

First, remove the access panels on the front and back of the furnace. Then, locate the blower unit. In some furnaces, the blower is a separate unit with a motor on one end. If the fan is bolted to the end of the blower assembly, you need to remove the bolts. In some cases, the blower is secured to the motor by metal frame rails.

The blower inside the squirrel cage is a crucial component of your HVAC system. Its function is to distribute air throughout the house by drawing air through the ducts and vents. Sometimes, the blower motor or the squirrel cage becomes damaged and needs replacement. Fortunately, replacing either part is not as difficult as it sounds, as long as you know how to remove the motor and fan housing.

It can be replaced

The blower motor in a furnace or squirrel cage needs to be replaced at least once a year to keep it working properly. To replace the motor, you can remove the fan from the cage and attach it to a tumble dryer. A skilled technician can replace the fan motor in under four hours, while a novice can do the job in five or six hours. However, be sure to turn off the power before you begin.

The blower motor of a furnace may be overheated due to dirt and dust. In such a case, the blower motor may have to be reset by pressing the red button on the furnace. Sometimes, older models have a motor that is bolted to the side of the fan. There is also a drive belt connecting the motor to the squirrel cage wheel. If the drive belt is worn or has a loose connection, it will cause the fan to squeal or stop running.

What is the best way to remove a furnace fan from a squirrel cage?

The best way to remove a furnace fan from a squirrel cage is by using a screwdriver to unscrew the screws that hold it in place.

How many screws are needed to remove the furnace fan?

Four screws are needed to remove the furnace fan.

Where are the screws located?

The screws are located on the back of the furnace fan.

What is the purpose of removing the furnace fan?

The purpose of removing the furnace fan is to clean it and to make sure that it is not damaged.

How often should the furnace fan be cleaned?

The furnace fan should be cleaned at least once a year.

What happens if the furnace fan is not cleaned?

If the furnace fan is not cleaned it can become damaged and it will not work properly.

What will happen if the furnace fan is damaged?

If the furnace fan is damaged it will not be able to circulate the air properly and this can cause the furnace to overheat.

How can the furnace fan be damaged?

The furnace fan can be damaged by dust and debris.

How can dust and debris get into the furnace fan?

Dust and debris can get into the furnace fan through the vents.

What is the best way to prevent dust and debris from getting into the furnace fan?

The best way to prevent dust and debris from getting into the furnace fan is to regularly clean the vents.

What will happen if the furnace fan is not working properly?

If the furnace fan is not working properly the furnace will not be able to circulate the air properly and this can cause the furnace to overheat.

What are the consequences of the furnace overheating?

The consequences of the furnace overheating can be serious and can include a fire.

How can I tell if the furnace fan is not working properly?

One way to tell if the furnace fan is not working properly is if the furnace is not heating up evenly.

What should I do if I think the furnace fan is not working properly?

If you think the furnace fan is not working properly you should contact a professional to have it serviced.

Can I clean the furnace fan myself?

Yes you can clean the furnace fan yourself but it is important to follow the manufacturer’s instructions carefully.

Leave a Comment