How To Remove Squirrel Cage From 277 Cat Loader

How to Remove the Sprocket Assembly From a 277 Cat Loader

This article will show you how to remove the sprocket assembly on your 277 cat loader. It will also show you how to disassemble the sprocket assembly to get at the sprockets. It should be pretty easy to do, but there are a few things you should remember before doing this. After all, you may have damaged the sprocket assembly while you were trying to remove it.

How to remove sprocket assembly from 277 cat loader

To remove the sprocket assembly, you must first locate the Tooling (C), which is located inside the engine compartment. Then, release the tension on the track drive (4) by sliding it toward the front of the machine. With the aid of a suitable lifting device, lift the sprocket assembly with a slight lifting tension. The track assembly weighs 136 kg (300 lb), so it is important to use appropriate lifting equipment.

How do I remove the squirrel cage from my 277 Cat Loader?

Answer 1: You must first disconnect the power to the unit.

Once the power is disconnected unscrew the bolts that hold the squirrel cage in place.

You may need to use a wrench or socket set to remove the bolts.

Once the bolts are removed the squirrel cage can be lifted out of the unit.

Leave a Comment

2 + six =